CS-660 GB
1
CS-660 METAL DETECTOR
INTRODUCTION
In order to obtain the best results from your new metal locator/detector, please carefully read this
instruction leaflet. The CS-660 is an all-purpose metal locator/detector and will provide you with
many hours of pleasure and treasure hunting.
DESCRIPTION AND CONTROLS
TUNE Adjust for the optimum setting for the prevailing temperature/ground conditions
(includes the on/off)
DISC Turning this control more clockwise has the effect of eliminating (DISCriminating)
unwanted signals such as iron or foil.
RETUNE Resets the detector to the optimum tune position. (Membrane switch - to operate,
push panel lightly).
ASSEMBLY
How to assemble your CS-660
The CS-660 comes to your dismantled for ease of packing. To assemble follow these few easy steps
:
1. Loosen the lock nut on the upper stem section and insert the lower stem section with search
head.
To Next Page
Loading...
Need help?
General
