Velleman LABPS3005N User Manual

LABPS3005N
V. 05 – 18/05/2022 3 ©Velleman Group nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing
this device into service. If the device was damaged in transit, do not install or use it and
contact your dealer.
2. Safety Instructions
Read and understand this manual and all safety signs before using this appliance.
Indoor use only.
Do not disassemble or open the cover under any circumstances. Touching live wires can
cause life-threatening electroshocks. There are no user-serviceable parts inside the
device. Refer to an authorized dealer for service and/or spare parts.
Always connect the device to an earthed power socket.
CAUTION - device heats up during use. Make sure the ventilation openings are clear at
all times. For sufficient air circulation, leave at least 1” (± 2.5 cm) in front of the
openings. Place the device on a flat, heat-resistant surface; do not place the device on
carpets, fabrics…
• Always disconnect mains power when device not in use or when servicing or
maintenance activities are performed. Handle the power cord by the plug only.
• Keep this device away from dust and extreme temperatures.
• Protect this device from shocks and abuse. Avoid brute force when operating the
device.
• Do not use the device when damage to housing or cables is noticed. Do not attempt
to service the device yourself but contact an authorised dealer.
3. General Guidelines
• Refer to the Velleman® Service and Quality Warranty on the last pages of this
manual.
• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Velleman LABPS3005N Specifications

Power

input voltage	220 V~ (± 10 %), 50/60 Hz
output voltage	0-30 VDC
current	0-5 A
power	150 W max.
cos Phi	0.82
ripple voltage	≤ 1.0 mV (rms)
ripple current	3 mA (rms)

Operating Environment

operating temperature	0 °C to +40 °C, < 90 % relative humidity
max. hours continuous at full load	8 hours

Weight and Dimensions

dimensions	117 x 190 x 270 mm
weight	4.8 kg