Inserting Batteries
1.
Ensure that the power is
turned off on the camera
and the grip. Use your
fingernail to protrude the
battery tray lever so you can
rotate and pull as indicated
above, and slide the battery
tray out of the grip.
2.
Canon LP-E6 or LP-E6N
Batteries: Insert up to
two batteries by placing
them into either slot in the
battery tray, while ensuring
the correct orientation
as shown on the tray.
Household Power Outlet:
The Canon ACK-E6
AC Power Adapter Kit
(sold separately) can be
connected to the grip. Place
the DC coupler through the
small groove on the back of
the grip. Ensure that the
cord doesn’t get pinched by
the battery holder.
8
To Next Page
