Need help?Do you have a question about the Vello BG-C12 and is the answer not in the manual?
General| Type | Battery Grip |
|---|---|
| Battery Slots | 2 |
| Vertical Shutter Release Button | Yes |
| Control Dials | Yes |
| AF-ON Button | Yes |
| AE Lock Button | Yes |
| Multi-controller | Yes |
| Built-in Intervalometer | No |
| Power Source/Battery Compatibility | LP-E6NH, LP-E6N, LP-E6 |
| Tripod Socket | Yes, 1/4"-20 |
| Dimensions | 151.3 x 117.2 x 81.2 mm |
General safety and usage guidelines for the battery grip and its components.
Precautions related to grip operation, battery handling, and environmental conditions.
Components for attaching and securing the grip to the camera.
Buttons and dials on the grip for camera operation.
Components related to battery insertion, contacts, and trays.
Holder for the camera's battery chamber cover.
Ensure camera is off, remove camera battery, and open battery chamber cover.
Store camera battery door in grip compartment to prevent loss.
Mount grip to camera, align screw, and tighten attachment wheel.
Remove the battery tray from the grip using the lever.
Insert up to two LP-E6 batteries correctly into the tray.
Insert six AA batteries correctly into the AA battery holder.
Rotate the battery tray lever to lock the tray into the grip.
Switch grip control-lock to ON and turn on camera to check battery status.
Connect Canon ACK-E6 AC adapter to the grip via the DC coupler.
To Next Page
