Vello BG-C12 - Attaching the Battery Grip to Camera; Preparation and Camera Battery Removal; Camera Battery Door Management

Attaching The Grip
1. Ensure that the power is
turned off on the camera
and that the control-lock
switch is set to OFF on the
battery grip.
2. Remove the battery
from the camera battery
compartment.
3. Open the camera
battery chamber cover
and remove as indicated
above.
4. To prevent loss, place the
battery chamber door
into the BG-C12 battery
door compartment. Align
your camera’s battery
chamber door with the
BG-C12 battery door
compartment. Insert the
door’s bottom pin (1)
1
2
3
6