Vello Lens Adapter - Removing the Vello Lens Adapter; Re-align Lens for Specific Position; Detach Camera from Telescope

5
1. If you prefer, you can leave the lens
adapter attached to your SLR adapter.
Release the camera/adapter assemblies
from the telescope.
TO REMOVE THE LENS ADAPTER
5. If desired, you can re-align the lens to a
specific position. To re-align the lens, use a
2 mm flat-head screwdriver to loosen the
three screws on the lens mount. Rotate
the lens to the desired position, and
tighten the three screws.