To Next PageTo Next Page
Need help?Do you have a question about the Vello shutterboss and is the answer not in the manual?
General| Supported Cameras | (see packaging) |
|---|---|
| Exposure Range | 0s to 99hr 59min 59s in one-second increments |
| Number of Shots | 1-99 |
| Frequency | 99 selectable channels over FSK 2.4 GHz |
| Range | 250 feet (80 meters) |
| Timer Control: Delay | 0s to 99hr 59min 59s in one-second increments |
| Interval | 1s to 99hr 59min 59s in one-second increments |
| Operating Temperature | -20° to +50°C (-4° to +122°F) |
Weight and Dimensions| Dimensions (Trans.) | Approx. 149 x 50 x 24 mm (5.9 x 2 x 1 in) |
|---|---|
| Dimensions (Receiver) | Approx. 63 x 38 x 31 mm (2.5 x 1.5 x 1.2 in) |
Introduction to the Vello Wireless ShutterBoss, its range, channels, and primary functions like self-timer and interval timer.
Highlights core features such as channel selection, extended range, multi-functionality, dual-function release, delayed release, and multi-exposure capabilities.
Diagram illustrating and labeling the various buttons and parts of the Vello Wireless ShutterBoss transmitter.
Diagram illustrating and labeling the parts of the Vello Wireless ShutterBoss receiver, including power, display, and mounting options.
Explains the various indicators and functions displayed on the transmitter's LCD screen for timer controls and settings.
Instructions for powering on both the transmitter and receiver units of the Wireless ShutterBoss, including indicator lights.
Step-by-step guide to set the same channel on both the transmitter and receiver for proper wireless communication.
Instructions on how to replace the batteries in both the transmitter (AAA) and receiver (CR2 lithium) for continuous operation.
Guide on how to mount the receiver onto a camera's hot shoe or tripod and connect the release cable to the camera.
Step-by-step instructions for using the Shutter Control to trigger a single shot, including focus and shutter release.
Instructions for setting up and executing continuous shooting mode using the Shutter Control for rapid fire photography.
Guide on using Timer Controls to set custom long exposure durations, exceeding the camera's standard capabilities.
How to use Shutter Control to set a delay before shooting and specify the number of continuous shots.
Introduction to the advanced Timer Controls for managing delay, exposure length, and intervals between shots.
Detailed steps for setting a delay of up to 99 hours, 59 minutes, and 59 seconds using the Timer Controls.
Steps to set the interval time between consecutive shots, ensuring it's longer than exposure or flash recycle time.
Instructions on how to specify the total number of exposures to be taken, from 1 to 99 or unlimited.
Procedure for activating the backlight on both the transmitter and receiver for low-light shooting conditions.
List of Vello Camera Release Cables and the camera models they support for wired and wireless operation.
Important warnings regarding device handling, operation in hazardous environments, and keeping away from children.
Guidelines on protecting the device from shock, moisture, temperature changes, and magnetic fields.
Overview of the device's technical details including frequency, range, timer controls, operating temperature, and dimensions.
Details on FCC compliance, including rules for radio frequency energy and conditions for operation.
Information regarding the product's limited one-year warranty, including coverage, limitations, and claim procedures.
