Need help?Do you have a question about the Vello shutterboss version ii and is the answer not in the manual?
General| Supported Cameras | (See packaging) |
|---|---|
| Self-Timer Delay | 0s to 99hr 59min 59s in one-second increments |
| Exposure Range | 0s to 99hr 59min 59s in one-second increments |
| Number of Shots | 1-399, unlimited |
| Interval | 1s to 99hr 59min 59s in one-second increments |
| Power Source | 2 AAA 1.5V alkaline batteries |
| Operating Temperature | −20° to +50°C (−4° to +122°F) |
| Cord Length | Approx. 33.5" (85 cm) |
Weight and Dimensions| Dimensions | Approx. 6.1 × 1.6 × 0.7" (155 × 40 × 18 mm) |
|---|---|
| Weight | 3.07 0z (87 g) |
Feature to power off the device for battery conservation.
Resets the ShutterBoss to default factory settings for ease of use.
How to use the ShutterBoss without batteries for basic shutter control.
Setting up timed sequences including delay, exposure, interval, and shot count.
Signifies the timer is running and settings cannot be altered.
Indicates a parameter is being adjusted and awaiting confirmation.
Shows that the shutter has been triggered or is about to be.
Avoid physical damage from shock, vibration, or dropping.
Protect from water, moisture, and high humidity as it is not waterproof.
Prevent condensation by gradual temperature acclimatization.
Shield from static charges and electromagnetic interference.
Information on display performance at varying temperatures.
To Next Page
