Vello WIRELESS SHUTTRBOSS 4.0 User Manual

15
The confirmation LED
oers a visual aid for activity
between the transmitter,
receiver, and your camera.
Press the transmitter’s shutter
release button halfway,
and the confirmation LED
will glow green. This signals
your camera to focus.
Press the shutter release
fully, and the confirmation LED
will flash red. This triggers
your camera to take a shot.
In Timer mode, the LEDs will
glow green for 3 seconds before
an exposure, and turn red for
the duration of the exposure.
CONFIRMATION LED

Vello WIRELESS SHUTTRBOSS 4.0 Specifications

General

Self-Timer Delay	0 sec. to 99 hr. 59 min. 59.9 sec.
Exposure Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Interval Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Number of Shots	1 to 199, infniite
Wireless Range	196 ft. (60 m)
Power Source	Transmitter: 2 × AAA batteries (not included) Receiver: 2 × AAA batteries (not included)
Standby Time	48 hr.
Operating Temperature	14°F to 113°F (−10°C to 45°C)
Storage Temperature	14°F to 140°F (−10°C to 60°C)
Dimensions (H × W × D)	Transmitter: 5.1 × 1.8 × 0.8 in. (130 × 46 × 21 mm) Receiver: 3.3 × 1.5 × 1.2 in. (85 × 37 × 31 mm)

Weight and Dimensions

Weight	Transmitter: 2 oz. (56.5 g) without batteries Receiver: 1.4 oz. (40 g) without batteries