Vello WIRELESS SHUTTRBOSS 4.0 User Manual

10
Wireless Setup
1. Turn o your camera and the
ShutterBoss receiver.
2. Mount the receiver into your
camera’s hot shoe, and rotate
the thumbwheel until secure.
Note: If your camera’s hot shoe
is in use, you can mount the
receiver to a bracket or cage
via its mounting foot or 1/4-20
socket.
3. Connect the shutter release
cable’s sub-mini plug end to
the receiver’s shutter release
port, and the other end to
your camera’s remote socket.
4. Turn on the camera and the
ShutterBoss transmitter and
receiver.
Note: Be sure to read your
camera’s manual for instructions on
using remotes.

Vello WIRELESS SHUTTRBOSS 4.0 Specifications

General

Self-Timer Delay	0 sec. to 99 hr. 59 min. 59.9 sec.
Exposure Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Interval Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Number of Shots	1 to 199, infniite
Wireless Range	196 ft. (60 m)
Power Source	Transmitter: 2 × AAA batteries (not included) Receiver: 2 × AAA batteries (not included)
Standby Time	48 hr.
Operating Temperature	14°F to 113°F (−10°C to 45°C)
Storage Temperature	14°F to 140°F (−10°C to 60°C)
Dimensions (H × W × D)	Transmitter: 5.1 × 1.8 × 0.8 in. (130 × 46 × 21 mm) Receiver: 3.3 × 1.5 × 1.2 in. (85 × 37 × 31 mm)

Weight and Dimensions

Weight	Transmitter: 2 oz. (56.5 g) without batteries Receiver: 1.4 oz. (40 g) without batteries