Vello WIRELESS SHUTTRBOSS 4.0 User Manual

16
MANUAL RELEASE
The simplest way of using
the Wireless ShutterBoss is
as a manual shutter release.
You can trigger your camera
by pressing the transmitter’s
shutter release button.
1. Adjust your camera settings,
such as exposure mode,
shutter speed, and focus and
shooting modes.
2. Press the remote’s shutter
release button halfway to
focus.
Note: Autofocus is not
compatible with back-button
focusing on some camera
models.
3. Press the shutter release
button fully to take a photo.

Vello WIRELESS SHUTTRBOSS 4.0 Specifications

General

Self-Timer Delay	0 sec. to 99 hr. 59 min. 59.9 sec.
Exposure Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Interval Time	1 sec. to 99 hr. 59 min. 59.9 sec.
Number of Shots	1 to 199, infniite
Wireless Range	196 ft. (60 m)
Power Source	Transmitter: 2 × AAA batteries (not included) Receiver: 2 × AAA batteries (not included)
Standby Time	48 hr.
Operating Temperature	14°F to 113°F (−10°C to 45°C)
Storage Temperature	14°F to 140°F (−10°C to 60°C)
Dimensions (H × W × D)	Transmitter: 5.1 × 1.8 × 0.8 in. (130 × 46 × 21 mm) Receiver: 3.3 × 1.5 × 1.2 in. (85 × 37 × 31 mm)

Weight and Dimensions

Weight	Transmitter: 2 oz. (56.5 g) without batteries Receiver: 1.4 oz. (40 g) without batteries