Need help?Do you have a question about the Velodyne CHT-10 and is the answer not in the manual?
Warning against opening the unit or exposing it to rain/moisture to prevent electric shock.
Advises observing all warnings on the equipment and referring service to authorized dealers.
Details integrated amplifier power ratings for CHT-8, CHT-10, and CHT-12 models.
Covers adjustable low-pass crossover and selectable phase control features.
Features line/speaker inputs/outputs and signal sensing auto turn on/off.
Mentions over excursion protection and anti-clipping circuit for safe operation.
Instructions for careful unpacking to avoid damaging the cabinet with staples.
Reminder to record the serial number on the warranty card for future reference.
Explains using RCA/Phono or Speaker Level inputs for system connection.
Guides on balancing subwoofer output and setting the low-pass crossover frequency.
Details Subwoofer Direct, phase, auto turn-on, high-pass crossover, and power switch.
Illustrates connecting the subwoofer using line-level RCA/Phono inputs.
Shows how to connect the subwoofer using speaker outputs from an amplifier.
Discusses the importance of using shielded phono cables and keeping lengths short.
Discusses room acoustics, omni-directional nature, and optimal positioning for output.
Advises against placing the unit near heat sources or excessive moisture.
Instructions to use a damp cloth and avoid harsh detergents for cleaning.
Explains the signal sensing circuit for automatic power on/off and standby.
A guide to check power, signal, controls, and protection circuits for issues.
Lists conditions requiring service by a qualified technician, like damage or water exposure.
To Next Page
General
