Need help?Do you have a question about the Velodyne CHT-15Q and is the answer not in the manual?
General| Driver Size | 15 inches |
|---|---|
| Enclosure Type | Bass Reflex |
| Type | Powered Subwoofer |
| Frequency Response | 18 Hz - 120 Hz |
| Inputs | Line-level, Speaker-level |
Guidelines for positioning the subwoofer for optimal sound.
Describes speaker-level and line-level input connections for the subwoofer.
How to balance subwoofer output with main speakers for optimal listening.
Adjusting the crossover frequency for seamless transition with main speakers.
Optimizing bass performance by aligning subwoofer phase with main speakers.
IR sensor window for receiving remote control signals.
Displays volume, phase, and Auto-EQ status with an 8-segment LED.
Connector for the microphone used during the Auto-EQ process.
Connects to amplifier/receiver speaker outputs for high-impedance input.
Sends a crossed-over speaker-level signal to the front speakers.
Discusses using receiver/processor subwoofer outputs with the built-in crossover.
Explains the functions of buttons on the CHT-Q remote control.
Controls the front panel LED display brightness and behavior.
Limits maximum output for late-night listening or to reduce neighbor disturbance.
Balances subwoofer volume with main speakers, adjustable via remote or back panel.
Describes four listening presets for different audio genres.
To Next Page
