Need help?Do you have a question about the Velodyne CHT-10Q and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Weight | 40 lbs |
| Inputs | Line-level, Speaker-level |
| Phase Switch | Yes |
| Frequency Response | 25 Hz - 120 Hz (+/- 3 dB) |
Describes connecting the subwoofer using line and speaker level inputs.
Details setting the crossover frequency for a smooth transition between subwoofer and main speakers.
Connects to amplifier or receiver speaker outputs for signal input.
Connects to pre-amp, LFE out, or processor for line-level signal input.
Sets the frequency at which the subwoofer's signal is cut off.
Details the functions and usage of the CHT-Q remote control.
To Next Page
