Do you have a question about the Velodyne CT-120 and is the answer not in the manual?
Type | Powered Subwoofer |
---|---|
Driver Size | 12 inches |
Amplifier Power | 120 watts RMS |
Enclosure Type | Bass-reflex |
Inputs | Line-level, Speaker-level |
Frequency Response | 25 Hz - 120 Hz |
Explains safety symbols and general cautions for safe operation.
Covers placement, ventilation, heat, water, and power sources.
Addresses cord protection, cleaning, non-use periods, and object entry.
Outlines conditions requiring service and user servicing limitations.
Introduction to the Velodyne subwoofer system and its purpose.
Critical safety warning about fire and shock hazards.
Instructions for careful unpacking and recording serial number.
Lists key features and controls of the subwoofer system.
Explains connection options via speaker-level and line-level inputs.
Adjusting subwoofer output level and low-pass frequency.
Bypass crossover and adjust phase for optimal sound.
Auto turn-on function and selection of high-pass crossover.
Locating and operating the main on/off power switch.
Connecting the subwoofer using line-level (line in) inputs.
Details on how the subwoofer handles audio signals for crossover.
Connecting the subwoofer using speaker-level inputs from amplifier.
Instructions to bypass the internal crossover for external use.
Recommendations for using shielded and appropriate length cables.
Guidance on positioning the subwoofer for best acoustic performance.
Instructions on how to clean the subwoofer cabinet safely.
Subwoofer can remain on continuously; auto standby function explained.
Recommendation to turn off the unit via master power switch when unused.
Steps to diagnose common issues before seeking service.
Identifies situations necessitating professional technician assistance.
Detailed technical specifications for the CT-100 model.
Detailed technical specifications for the CT-120 model.
Contact details and web address for Velodyne Acoustics, Inc.
List of other subwoofer series offered by Velodyne.