Velodyne DD-10+ - Choose Interface to Use with Manual-Eq Optimization

www.velodyne.com
24 - Digital Drive
PLUS
Series User’s Manual
CHOOSE INTERFACE TO USE WITH MANUAL-EQ OPTIMIZATION
This section is an overview of the subwoofer optimization interface options so you can choose which to use
for Manual-EQ optimization. You can perform Manual-EQ optimization using either the TV or Windows Setup
Program interface. The Setup Program comes with your Digital Drive
PLUS
and needs to be installed on a Windows
XP, Vista or 7 computer.
If you want to use the Auto-EQ, Self-EQ or Place & Play method, you won’t need to use either, so you can skip
this section. However, if you’re curious to see the low frequency response output of your audio system using
Auto-EQ, you can view it with both of these interfaces.
Intervace Choices for the Manual-EQ Optimization Method:
Windows Computer TV Screen
Velodyne Recommendation Preferred Use if you don’t have a Windows XP, Vista or
7 laptop or desktop computer
Time to Setup Fast. Doesn’t require access to
TV video input.
Depends on how accessible the video input
connector is on your TV. With many entertainment
systems, the TV’s composite video or S-video input
may be dicult to reach because it is usually on
the back of the TV close to a wall. Also, the video
input is often already connected to another video
component.
Equipment Required Windows laptop or desktop
computer
TV with composite video or S-video input
Operating System
Requirements
Windows XP, Vista or 7
(MAC OS and Linux OS not
supported)
N/A
Software Required The included Setup Program
installed on the Windows
computer
N/A