Charging headphones
Charging the vBold before using for the first time is recommended in order to maximize battery life. Low battery
is indicated by the LED status indicator flashing red approximately every 10 seconds.
To begin charging, connect the USB cable (micro USB end) to the port at the bottom of the left ear cup.
Connect the other end of the USB cable to any charge capable USB port or a USB-style charger. Your vBold
headphones will begin charging, as represented by the red LED status indicator. Once charging is complete, the
LED status indicator will illuminate green.
Bypass cable
When using the bypass cable, the audio signal is applied directly to the headphone speakers and all electronics
are bypassed. No function of the headphones will work when using the bypass cable other than simply playing
the audio signal.
Charge time About 1.5 hours
Talk time Up to 10 hours
Music playback time Up to 10 hours
Standby time Up to 100 hours
Reset functions
Paired device list reset In off mode press and hold the power and volume
down (-) key. The LED indicator will flash fast
alternating red and blue.
Hardware reset (use if the headset malfunctions and
is unresponsive)
While charging the headset press both the power and
volume up (+) keys.
Fold your headphones
vBold headphones can fold for easier storage. To fold, remove any cables attached to the headphone and push
each ear cup inward towards the inside of the band.
Page 5 of 9
vBold user’s guide
Pairing headphones
1. Make sure vBold and pairing device are within 1 meter of each other when pairing
2. Enable
Bluetooth
function on pairing device
3. Press and hold the power button on vBold until the LED flashes blue and red repeatedly
4. Search for
Bluetooth
devices on pairing device
5. Select Velodyne vBold from the “Devices Found” list on the pairing device (if you do not see Velodyne
vBold, repeat from step 1)
6. After successful pairing, the LED indicator will flash blue every 5 seconds
Note: Pairing is also possible by touching the center of the right ear cup with an NFC capable device.
To Next Page
Loading...
