24
INSTALLATION
MANUAL
3.5 CONNECTION OF THE CHARGER TO ANOTHER CHARGER,
OR TO A COMMUNICATIONS ELEMENT
The LITE Uno and Kubo models have two local network sockets which permit, as well
as connection to a METER SET (see item 3.4 “INSTALLATION OF THE SINGLE-PHASE
AND THREE-PHASE METER SET”), the following:
• Connect the charger to a communications device (modem, router, switch, ...).
The communications device can be connected to either of the two
sockets interchangeably.
• Connect several chargers to one another, forming a group. All of the chargers in a
group must be connected to the same LAN, whether by directly connecting them
to one another, or by using connecting elements (a switch for example).
Ethernet bridges
3- INSTALLATION
To Next Page
Loading...
