VELUX
®
6
ENGLISH
A
Installation of power supply unit
1. Install the wall bracket for the power supply unit on
the wall. It is recommended to place the power supply
unit in the room where the product to be connected has
been installed. In case of additional power supply units,
the wall brackets must be spaced at least 11 mm apart.
2. Connect the connecting cable to the power supply unit.
Important: The polarity (+/-) must be kept all the way
through to the product.
3. Hook the power supply unit on the wall bracket.
4. Click the lid on the power supply unit.
Installation in rooms with a high level of humidity and
with hidden wiring must comply with national regulations
(contact a qualified electrician if necessary).
The power supply unit has a built-in RF unit and will not be
operative if placed in a metal cabinet.
To Next Page
Loading...
Need help?
General
