Velux WLR 100 User Manual

2 2 2 2 2 2 2
2
1
2
3
Important information .........................................3
Wichtige Informationen .....................................3
Information importante .......................................3
Informazione importante ...................................3
Setting the security code................................ 5-6
Einstellung des Sicherheitscodes ................... 5-6
Réglage du code de sécurité ........................ 5-6
Selezione del codice di sicurezza ................ 5-6
Operation of the remote control .......................4
Betätigung durch Fernbedienung ......................4
Utilisation de la télécommande.........................4
Uso del telecomando .........................................4
Setting of operation mode ............................. 7-8
Einstellung der Bedienungsart ....................... 7-8
Réglage de mode opératoire ........................ 7-8
Impostazione della modalità operativa ............7-8
Operation of up to three motors
per window .................................................13-16
Bedienung von bis zu drei Motoren
je Fenster .....................................................13-16
Commande de un à trois moteurs
par fenêtre ...................................................13-16
Operatività di fino a 3 motori per
singola finestra ............................................13-16
Operation of one motor
per window ................................................. 11-12
Bedienung von einem Motor
je Fenster ..................................................... 11-12
Commande d’un moteur
par fenêtre ................................................... 11-12
Operatività del singolo motore per
finestra ......................................................... 11-12
English: Contents
Deutsch: Inhalt
Français : Sommaire
Italiano: Contenuto

Velux WLR 100 Specifications

General

Power Source	Battery
Battery Type	2 x AAA batteries
Frequency	868 MHz
Compatibility	VELUX roof windows
Operating Range	Up to 30 meters (open space)

Summary

Remote Control Operation

Button Functions

Details functions of 'up/open', 'stop', and 'down/close' buttons.

All Motors Operation

Explains simultaneous operation of all motors/windows using the 'ALL' button.

Motor Selection for Specific Windows

Describes using the 'M' button for specific window motor configurations.

Motor Activation Selection

How to select the motor to be activated.

Operation Display Indicators

How the display shows which motor is operating.

Setting the Security Code

Security Code Procedure

Instructions for setting the personal security code on the keypad and remote.

Setting Operation Mode

Automatic Operation Mode

Configures the motor to run to end-stop with a single button press.

Manual Operation Mode

Configures the motor to run only while the button is pressed.

Single Motor Operation Per Window

Switch Setting for Single Motor

Set switch 4 to 'OFF' when operating one motor per window.

Multiple Motor Operation

Operation of Up To Three Motors

Set switch 4 to 'ON' when operating up to three motors per window.

Window Operation Control

Single Window Operation

Select a window and motor, then press the operation button.

Multiple Window Operation Control

Individual Window Operation

Select a window and motor, then press the operation button.

Simultaneous Operation

Operate all motors with the same number simultaneously.