veme V401 - Preparation before use; Start to use Veme machine

Before use, shave the area to be irradiated (Except for the face), keep it dry. This ensures that the
hair follicle under the skin absorbs energy to the maximum extent for opmum hair removal.
Preparation before use
1. Plug the power cord into the device's power interface and connect to the power outlet.
(The device cannot be charged).
2.Then press the power buon to turn it on. Press the level adjustment buon to adjust the
level. Starng from the low level, if you feel comfortable, please adjust to the higher level for
beer results.
3.Keep the lamp head 90°onto the skin. When the display flashes, press the flash buon to emit
light. (Long press the flash buon for 3s to start Auto flash.) It is recommended to irradiate 2
mes for each area.
4. Aer finished, press and holds the power buon to turn off, then unplug the power adapter.
5. Wipe the lamp with a non-alcoholic wipe or a so ssue.
6. Place the device in a dry, well-venlated area, out of children's reach.
Start to use Veme machine
3
3. During the automac flash mode, simply press the flash buon, the device switches to manual
flash mode.
90°