Vemer memo AST2 - Hour Meter Menu Pag; Reset Menu Pag

English
- 22 -
5SERMANUALMEMO!34
HOUR METER MENU
4HEHOURMETERFUNCTIONINDICATESTHETOTALTIMEINWHICHTHEOUTPUT
REMAINEDINTHEONSTATUS
4HEHOURMETERRANGEISBETWEENANDHOURSWHENTHE
MAXIMUMLIMITISREACHEDITISAUTOMATICALLYRESET
4ODISPLAYTHEHOURMETERVALUE
± FROMTHEMAINPAGEPRESS“
”
± SELECT(/52#.4WITH“C1” and “C2”
± PRESS“Ok”TOCONFIRM
± CHOOSEWITH“C1” and “C2”THE
OUTPUTCONCERNED
± PRESS“Ok”4HETOTALUSEISDISPLAYED
± PRESS“Ok”AGAINTOACCESSTHEHOUR
METERRESETOPTION0RESS“Ok”AGAIN
TOCONFIRMOR“
” TOEXITWITHOUT
RESETTING
± 4HEMESSAGE
APPEARSON
THEDISPLAYTOINDICATETHECHANGETHAT
WASMADE
RESET MENU
4HEINSTRUMENTSDEFAULTSTATUSCANBERESETWITHTHERESETFUNCTION
4HEREAREDIFFERENTRESETSAVAILABLE
RESETSETTINGSDELETESALLSETTINGSTHATWEREMADE
RESETPROGRAMMESDELETESALLSAVEDPROGRAMS
RESETHOURMETERRESETSTHEOPERATINGTIMEHOURMETER
RESETALLRESETSETTINGSRESETPROGRAMSRESETHOURMETER
4OPERFORMTHERESET
± PRESS“
” TOACCESSTHEMENU
± SELECT2%3%4WITHTHEKEYS“C1” and “C2”ANDPRESS“Ok”
± USETHEKEYS“C1” and “C2”TOSELECTONEOFTHEABOVELISTEDRESETS
ANDPRESS“Ok”
± PRESS“Ok”TOCONFIRM
To perform a complete instrument reset, restoring the factory settings,
use a sharp instrument to press the “R” key. This deletes all the
settings that were made and restores the default conditions.