Vemer memo AST2 - Copying and Pasting Programs via IR

English
- 24 -
5SERMANUALMEMO!34
Paste function
4OTRANSFERAPROGRAMFROMTHEREMOTECONTROLTOONEORMOREmemo
AST2FIRST
± CONNECTTHEmemo AST2CLOCKTOTHEMAINSNETWORK
± PRESSTHE“R”KEYTORESET
THEINSTRUMENTANDACTIVATE
THERECEPTIONMODE4HEFOLLOWING
MESSAGEWILLAPPEARONTHE
DISPLAY
± ACTIVATETHETRANSMISSIONONTHE
REMOTECONTROLANDSELECTWHICH
PROGRAMTOSENDSEETHEINSTRUCTIONS
FORTHEREMOTECONTROL
± DURINGTHETRANSMISSIONTHEFOLLOWING
MESSAGEWILLAPPEARONTHEDISPLAY
 ONTHEREMOTE
CONTROLDISPLAYANDTHEREMOTECONTROLWILLEMIThBIPSv
7HENCOMPLETEDTHEFOLLOWINGMESSAGEISDISPLAYED

Note: during transmission, point the remote control towards the
front of the instrument to facilitate the transmission. A possible
problem with the transmission is signalled with the message
on the clock’s display.
!TTHISPOINTTHEPROGRAMSANDDATE
ANDTIMESETTINGSARETRANSFERREDTOTHE
INSTRUMENTANDITISREADYTOOPERATEWITH
THETRANSFERREDPARAMETERS
C1 C2
R
Ok