EasyManua.ls Logo

VENCO VHR 16 - User Manual

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION OPERATION &
MAINTENANCE INSTRUCTION
HEAT RECOVERY UNITS VHR AND VHR EC MODELS
VENCO Havalandırma ve Makina San.ve Tic. A.Ş.
2004. Cad. No:5 45400 OSB Turgutlu MANISA / TURKİYE
Tel: +90 (236) 332 5070 Fax: +90 (236) 332 5030
www.venco.com.tr venco@venco.com.tr
2019.10

Other manuals for VENCO VHR 16

Questions and Answers

  • L
    Leslie HuntJul 25, 2025
    What to do if my VENCO VHR 16 has low airflow?
    • C
      Craig ClarkJul 25, 2025
      If the VENCO Heating System experiences low airflow, several factors could be at play. First, pressure loss in the ducts might be higher than initially calculated, suggesting a need to review the duct design. Second, clogged or dirty filters can significantly impede airflow; cleaning or replacing the filter is advised. Lastly, excessive leakage on the pressure side of the system can diminish airflow, so inspect doors and duct connections for leaks.
  • A
    Amanda RussellAug 3, 2025
    Why is there high airflow in my VENCO VHR 16 Heating System?
    • B
      brightmackenzieAug 4, 2025
      If your VENCO Heating System exhibits high airflow, it could be due to a few reasons. Check the duct connections for excessive leakage on the suction side of the system. Also, the fan motors might be experiencing overcurrent, indicating the engine is overloaded, so measure the current drawn by the engine. Another potential cause is a low supply voltage; in this case, consider installing grills.
  • C
    charlessimonAug 13, 2025
    How to troubleshoot no air flow in VENCO Heating System when the motor isn't working?
    • D
      Daniel SheaAug 13, 2025
      If there is no air flow and the motor isn't working in your VENCO Heating System, start by checking the power supply to ensure it's functioning correctly. If the power supply is okay, inspect the fan motor cables at the main controller board to ensure they are tightly connected, as thermal protection might be open. Also, verify the connection of the control panel by checking the socket behind the controller.

Summary

Introduction to Venco Heat Recovery Units

Venco Heat Recovery Units and VHR Models

Details the classification and types of VENCO Heat Recovery Units and VHR EC Models.

Heat Recovery Unit Schematics

Illustrates the internal components and airflow path of VENCO Heat Recovery Units.

Technical Specifications for Heat Recovery Units

VHR Model Technical Specifications

Contains electrical and performance specifications for standard VHR models.

VHR EC Model Technical Specifications

Lists technical specifications for VENCO VHR EC models with high-efficiency EC fans.

Dimensions for VHR and VHR EC Models

Provides physical dimensions, duct connection sizes, and weight for all models.

Working Conditions

Transportation, Storage, and Installation

Connections

Duct Connections

Explains proper duct connection methods to ensure optimal airflow and minimize losses.

Drain Connections

Provides instructions for correctly connecting the drain pipe to prevent air suction.

Electrical Connections

Outlines the requirements and safety standards for making electrical connections.

Safety Requirements

Safety Labels

Controls Before Start-Up

Technician Training and Safety Recommendations

Start-Up Procedures

Maintenance Guidelines

Control Functions

Standard Electronic Controller (SEC)

Details the features and operation of the Standard Electronic Controller (SEC).

Functional Electronic Controller (FEC)

Explains the functions and options available with the Functional Electronic Controller (FEC).

Troubleshooting and Spare Parts

Appendices: Electrical Wiring Diagrams

Standard Controller (SEC) Wiring Diagram

Presents the electrical wiring diagram for the Standard Controller (SEC).

Functional Controller (FEC) AC FAN Wiring Diagram

Shows the electrical wiring for the FEC controller with AC fans.

Functional Controller (FEC) EC FAN Wiring Diagram

Illustrates the electrical wiring for the FEC controller with EC fans.

Functional Controller (FX 3.1 PRO) AC FAN Wiring Diagram

Details the wiring for the FX 3.1 PRO controller with AC fans.

Functional Controller (FX 3.1 PRO) EC FAN Wiring Diagram

Details the wiring for the FX 3.1 PRO controller with EC fans.

230 V;50 Hz;1 Phase Electrical Heater Wiring Diagram

Wiring diagram for 230V/50Hz/1 Phase electrical heater components.

400 V;50 Hz;3 Phase Electrical Heater Wiring Diagram

Wiring diagram for 400V/50Hz/3 Phase electrical heater components.

VENCO VHR 16 Specifications

General IconGeneral
BrandVENCO
ModelVHR 16
CategoryHeating System
LanguageEnglish

Related product manuals