ENG
41
Function of the soft black remote control
EXTRACTION POSITION 1
EXTRACTION POSITION 2
EXTRACTION POSITION 3
EXTRACTION POSITION 4
BOOST FUNCTION
‘CLEAN FILTER’ INDICATORR
EXTRACTION ON / OFF
LIGHT ON / OFF
LIGHT +
LIGHT -
MOTOR -
MOTOR +
Pushing the button or the button will swith on the motor.
Pushing the button will put the motor in position 1. The speed of the motor can be changed
between the Positions 1, 2, 3 and Boost using the button or the button.
Pushing the button in Position 1 or pushing the button in Boost position has no effect.
If the motor is switched off using the button and later is switched on again using the same
button, the motor is returned to the last operating position.
Hold down the button for a long time to activate the run-on time if the motor is active.
Switching on the lighting is also possible with the button.
The lighting cannot be switched off with the button; this is only possible with the
button
.
To Next Page
Loading...
