Veneto VT-GR486 - Initial Setup and Preparation

8
Introduction
Before you start
1.Make sure that the anti-tip of the range has been properly installed.
2.Find the model and serial numbers on the CSA label in the bottom right-hand corner
of the backboard.Note these numbers down for future reference in the space provided
in section ‘Warranty and service’.
3.Read this guide, taking special note of the ‘Safety and warnings’ section.
4.Remove all the packaging from the oven(s) and cooktop. Recycle items that you can.
If any adhesive residue is left on surfaces, remove this using dish washing liquid on a
soft cloth. Do not use any harsh or abrasive cleaners.
5.Make sure you follow the instructions under ‘First use’ before using your range
for cooking.