Installation
IMPORTANT: THIS INSTALLATION MUST BE
COMPLETED BY A SUITABLY QUALIFIED PERSON.
VENINI ONLY SANCTION THE INSTALLATION GIVEN IN
THIS INSTRUCTION MANUAL. YOU SHOULD KEEP THE
TRANSIT PACKAGING, IN CASE YOU NEED TO
TRANSPORT THE MACHINE IN THE FUTURE.
Installing the appliance
IMPORTANT: THIS APPLIANCE MUST NOT BE BUILT-IN.
IMPORTANT: The air vents of the appliance must never be
covered or blocked in any way as this will cause the dryer to
overheat. You MUST leave a gap of at least 10cm at the back of
the appliance, and 150cm at the front.
Positioning
The appliance should be positioned on a solid and flat surface. This will
reduce vibration and noise. Large amounts of vibration can damage the
appliance.
17
To Next Page
Loading...