Need help?Do you have a question about the Venitem GIUDECCA and is the answer not in the manual?
Details explosion risk from wrong battery and hearing loss from high sound pressure.
Specifies maximum 5mm installation depth from flush for tamper function.
Ensures correct direction and spirit level orientation for built-in box installation.
Install protective cover with 4 screws to avoid box damage and contamination.
Drill holes only where indicated to avoid improper housing of internal components.
Details the GIUDECCA sounder, its features like LED, tamper protection, and programmable functions.
Step-by-step guide for assembling the sounder, including inserting trolley and covers with screws.
Lists terminals and their corresponding connections for wiring the sounder.
Describes anomaly detection, output signaling via terminal 6, and LD4 LED notifications.
Explains terminal 5's role as flash reset or speaker block based on DIP6 setting.
Details how to connect terminals 7 and 8 to the tamper line from the control panel.
Explains how terminals A, B, C, D control customizable LED notifications, using DIP 8.
Covers DIP settings for sound timing, input polarity, sound type, status signalisation, and alarm counting.
Explains DIP 8 setting for RGB LED behavior and notification logic.
Lists detailed technical specifications including voltage, current, frequency, power, and dimensions.
Provides guidelines for product disposal and warranty terms against defects.
General| Brand | Venitem |
|---|---|
| Model | GIUDECCA |
| Category | Marine Equipment |
| Language | English |
To Next Page
