Pg. 4/4
• To activate the fail safe test mode press the SET button seven times until the “set t” screen appears.
• Press UP or DOWN to select ON.
• Turning this feature ON simulates a fail safe activation for approximately 20 seconds.
• With the radio on and full throttle applied, check to make sure the Throttle Limiter is properly reducing
the servo travel according to the settings you chose (20%, 40%, 60% 80%, or 99%) in Step 5.
• Change settings if required.
• After approximately 20 seconds the Fail Safe Test Mode will automatically reset to OFF.
9. Voltage / Temperature Fail Safe Test Mode (Seventh Menu Screen)
SET
Venom Racing
North America
Tel 800.705.0620
Fax 800.705.0621
Tel 61.2.9666.6944
Fax 61.2.9666.6955
Australia
customerservice@venom-racing.com
Customer Service email:
This screen allows you to test your Low Voltage / Overheat Fail Safe setting without having to use a flat battery or heat source
to trip the unit into fail safe mode.
Warranty Service and Support
Thank you for purchasing the Venom Smart Temp / Fail Safe. We want to assure you that all of our products are backed by first-class customer service and
support. If you have any questions or concerns about the VST, please call our Customer Service Department toll free at 800-705-0620, Monday-Friday,
9:00am - 5:00pm Pacific Standard Time. You can also email us at customerservice@venom-racing.com. For hands on service and faster access to
replacement parts, please visit and support your local hobby shop.
Repair
If your product requires factory repair, please call or email our Customer Service Department in advance to receive a Return Authorization Number, the
correct shipping address and an estimate for work if required. When sending in product for repair:
• Write the Return Authorization Number on the outside of the package.
• Include your name, address, and daytime telephone number on a piece of paper inside the package.
Note: We cannot return ship to P.O. Boxes.
• Include a short summary of the problem.
Replacement Parts
The following replacement part is available at your local hobby shop or online at www.venom-racing.com.
• VEN-0600P Temperature Monitor Wire Loop Probe
Limited Warranty
Venom Racing warrants this product to be free of material and workmanship defects for a period of ninety (90) days from the date of purchase.
Because this is a high performance product and is intended to be used over a wide range of operating conditions and situations, Venom Racing does not
offer any warranty, express or implied, that covers damage caused by normal use or wear, or cover or imply how long any component of this product will last
before requiring replacement due to wear. The Venom Smart Temp is designed to be used as a tuning aid and a warning device. Because this product is
used over a wide range of operating conditions and situations,Venom Racing shall not be held responsible nor warrants any damage to your model, it’s
engine or components that are damaged due to excessive temperature, low voltage, radio signal failure or user error.
Any and all warranty coverage does not cover replacement parts and components damaged by water, neglect, improper use, chemical damage, crash
damage, or unauthorized product modifications associated with this product.
Venom Racing and affiliates, partners and subsidiaries cannot control the use, application or installation of this product and shall not be held liable for any
property damage or personal injury resulting from the improper use of this product.
To Previous Page
Loading...