23EN
Fill water tray in lower housing with fresh
tap water (approx. 9 litres) until it is no
more than half full.
PUTTING INTO OPERATION
1
Place evaporation unit B into the water
tray of the lower housing A and place
upper housing C onto lower housing A,
making sure it is the right way round.
Plug power plug D into a mains socket
and switch appliance on by tapping the
Power button
.
i
The Power button
for switching
the appliance on and off only
lights up when the appliance is
plugged in.
2 3
C
B
D
A
220-240V
50-60Hz
To Next Page
Loading...
