19EN
A Fill lower housing 7 with tap water up to maximum WATERLINE marking and
add 50 ml hygiene additive
8 (complete content of bottle).
!
Never fill the appliance
before taking off the upper
housing!
i
Adding the hygiene additive is
very important, because this
optimally humidifies the air.
B Insert disk stack
5 into lower housing 7 and place upper housing 2 onto
lower housing
7.
C Plug in the power supply unit
3 to the mains and switch on the appliance by
briefly pressing down the button
on the control panel 1.
PUTTING INTO OPERATION
A
B C
!
To Next Page
Loading...
