Need help?Do you have a question about the Ventair Stanza STA1203WH and is the answer not in the manual?
Details the components and setup of the fan's mounting plate system.
Instructions for securely attaching the fan bracket to the ceiling structure.
Specific guidance for mounting the fan on a racked ceiling.
Describes methods for attaching fan blades, including quick-fix and hanging position.
Step-by-step process for assembling the fan's light kit.
Instructions for setting up and pairing the remote control receiver.
Explains how to operate fan speed and light features via the remote.
Illustrates the wiring for the isolation switch and remote control.
Provides advice for a successful fan installation and setup.
Addresses issues like wobbling, vibration, and unusual noises.
This document provides comprehensive installation and operational instructions for the Ventair Stanza ceiling fan, available in two models: STA1203WH and STA1203WHLED. The fan is designed to facilitate air movement within a room, offering both standard fan functionality and an integrated LED light in the STA1203WHLED model.
The Ventair Stanza ceiling fan serves primarily to circulate air, providing cooling in warmer conditions and aiding in air distribution. Both models feature a 55-watt motor, ensuring efficient air movement. The STA1203WHLED model additionally incorporates a 20-watt LED light panel, offering illumination alongside air circulation. The fan operates on a 220-240V, 50Hz electrical supply.
The fan's operation is managed via a remote control, which comes factory-paired with the fan's receiver. This remote allows users to adjust fan speed through "Eco," "Med," and "High" settings. For the STA1203WHLED model, the remote also controls the LED light, enabling users to turn it "ON/OFF" and dim it through various steps (75%, 50%, 25%, and 100% light output) using the "STEP DIM" button. The remote control system utilizes 433MHz radio frequency, complying with RED Directive 2014/53 EU and relevant ETSI EN standards.
The fan is designed for ceiling installation, utilizing a mounting plate hanging system that includes a hanger ball and down rod for secure attachment. A safety steel wire is also provided for additional security. The installation process involves fixing a bracket to the ceiling, ensuring it can support at least four times the net weight of the fan. Proper installation requires the fixing tab on the hanger ball to fit securely into the groove of the mounting bracket, and for racked ceilings, the fixing tab should be set at the highest point.
Blade assembly is a critical step, with two options provided: a quick-fix method or attaching blades while the fan is in a hanging position. It is crucial to ensure that the "THIS SIDE UP" text on the blades faces upwards once installed. For the STA1203WHLED model, the light kit assembly involves connecting the light wire to a terminal, then screwing on the decorative ring and LED light panel after the blades are installed.
Electrical wiring is facilitated by a terminal block mounting bracket and a remote control receiver. The wiring diagram illustrates connections for the earth wire, live wire (via a localised single pole switch), and neutral wire to ensure safe and correct electrical setup. All electrical work must be performed by a licensed electrician and in accordance with current I.E.E. Regulations or appropriate national standards. A local isolator switch capable of disconnecting all poles with at least 3mm contact separation must be provided.
The Ventair Stanza ceiling fan offers user-friendly operation through its remote control. The ability to select different fan speeds (Eco, Med, High) allows for customized comfort levels, from gentle air circulation to more powerful cooling. The "OFF" button provides a simple way to cease fan operation.
For the STA1203WHLED model, the integrated LED light enhances the fan's utility, providing adjustable illumination. The "ON/OFF" light control and the "STEP DIM" function offer flexibility in lighting, allowing users to set the brightness according to their preference or the ambient light requirements. This feature makes the fan a dual-purpose appliance, combining air movement with lighting.
The remote control pairing process is straightforward, with instructions provided for re-pairing if necessary, or for pairing a single remote handset to multiple fans. This ensures flexibility in managing multiple fan units within a space.
Safety is a key aspect of the fan's design and usage. Users are explicitly warned against inserting anything into the fan blades while operating, as this can cause damage and imbalance. It is also advised not to connect the fan motor to a dimmer switch, as this can lead to unsatisfactory performance (motor hum) and potential motor damage. The fan blades must be installed at least 2.3 meters above the floor to prevent accidental contact.
The fan's design also considers the interaction with other appliances; it is not recommended to operate ceiling fans and gas appliances in the same room simultaneously. This highlights a consideration for indoor air quality and safety.
Regular maintenance is crucial for ensuring the longevity and optimal performance of the Ventair Stanza ceiling fan. The manual provides clear guidelines for cleaning and troubleshooting.
For cleaning, users are advised to keep the fan clean by wiping away dirt with a clean, soft cloth, ordinary soap, and water, then wiping dry. It is explicitly stated not to use solvents like gasoline or petroleum, as these can damage the fan's finish or components. Before any cleaning or maintenance, it is imperative to disconnect the power supply by removing fuses or turning off the circuit breaker to ensure complete electrical isolation.
Troubleshooting tips are provided for common issues such as excessive movement, wobbling, or abnormal shaking/vibration. These include checking that all screws, bolts, and nuts are secured tightly. If wobbling persists, changing the position of the blades or checking blade height by carefully rotating the fan and measuring each blade from a fixed point on the ceiling is recommended. Adjustments can be made by loosening and re-tightening the upper and lower blade screws. If a blade is deformed, all three blades should be replaced as a set to maintain balance and prevent further issues.
The manual also addresses unusual noises like knocking or ticking, suggesting checks on the bracing structure to ensure it is sound and firm, as even slightly loose fixings can create reverberations. It is also recommended to ensure the upper canopy is not in contact with the ceiling surface, leaving a small gap (1mm to 4mm) to prevent noise. The document acknowledges that irregular humming noises can be caused by electrical interference or ripple control signals from the electricity provider, which are often outside the manufacturer's warranty.
"Night Noise" is specifically addressed as a common cause for service calls, explaining that small noises, unnoticeable during the day, may become apparent in quiet nighttime hours. This can also be influenced by slight power fluctuations or mains frequency control signals.
For fans with integrated lights, the manual notes that noises and vibrations can be more accentuated when a fan light is fitted. For example, a fan light glass that is not tightened or worked loose can cause a rattle, emphasizing the importance of securing all components.
A critical safety warning is issued: if the fan develops excessive wobbling or unusual oscillating movement, users must immediately stop using the fan and contact the manufacturer, its service agent, or suitably qualified persons. This underscores the importance of safety and professional intervention for significant operational issues.
Overall, the Ventair Stanza ceiling fan is presented as a robust and feature-rich appliance, with detailed instructions to ensure safe installation, efficient operation, and effective maintenance, contributing to its long-term reliability and user satisfaction.
General| Model Number | STA1203WH |
|---|---|
| Type | Ceiling Fan |
| Fan Type | Standard |
| Number of Blades | 3 |
| Motor Type | AC Motor |
| Speed Settings | 3 |
| Color | White |
| Light | No |
| Remote Control | No |
| Power | 60 W |
| Voltage | 220-240V |
| Frequency | 50 Hz |
| Oscillation | No |
| Height Adjustment | No |
| Blade Diameter | 120 cm |
| Blade Material | Plastic |
| Material | Wood |
To Next Page
