Meditell 2 User Manual VI49.2
- 5 -
2.0 Operating Modes
2.1 Normal Stand-By Mode – Mains On (Quiescent)
In Normal operation the Meditell system will by in standby waiting to receive a “Call” activation
The Green power LED will be illuminated indicating the Mains Supply is present and the ECU (Electronic Control
Unit) is in stand-by.
2.2 Battery back Up Mode - Mains off.
If a battery back up unit is fitted, should the mains fail the back battery will allow the Meditell 2 system to continue
to operate.
During Battery back Up Mode as in Standby by mode the ECU is waiting to receive a call.
The Green Power LED & Amber Fault LED will flash once every 5 seconds.
2.3 Battery Saver Power Off.
If the Meditell 2 System operates from the battery back up for a significant time it may flatten the battery. The
ECU will automatically switch of the system into battery saver mode once the battery become flat. When
operating in battery saver mode the Meditell 2 can not receive a call.
The Green Power LED & Amber Fault LED will flash once every 20 seconds. The Internal buzzer will bleep once
every 30 seconds.
To Next Page
Loading...