VENTCROFT Meditell 2 - To Generate an Priority Call from Stand by Mode; To Generate an Priority Call While a Standard Call Is in Progress; Reset a Priority Call Using a Remote Master Reset Device; Reset a Standard Call Using a Remote Master Reset Device

Meditell 2 User Manual VI49.2
- 8 -
4.6 To Generate an “Priority Call” from “stand by mode”
1, Locate a push button “Priority Call” device.
2, Briefly press the button for around half a second.
3, The systems visual and audible Warning Devices will be activated and will sound and flash twice per second.
The Indicator Mounted on the Call Device will illuminate in sympathy with the remote warning devices.
4.7 To Generate an “Priority Call” while a “Standard Call” is in progress
1, Locate a push button “Priority Call” device.
2, Press the button for around half a second.
3, The systems visual and audible Warning Devices will increase in speed, and will sound and flash twice per
second.
The Indicator Mounted on the Call Device will illuminate in sympathy with the remote warning devices.
4.8 Reset a “Priority Call” using a “Remote Master Reset Device”
1, Locate a “Remote Master Reset Device”
2, Insert and turn the enable key clock wise.
3, Press the Reset Button for around 1 second.
3, The “Priority Call” is Reset, All Field devices are silenced.
4, The field warning devices will and the ECU buzzer will bleep twice to confirm successful reset.
4.9 Reset a “Standard Call” using a “Remote Master Reset Device”
1, Locate a “Remote Master Reset Device”
2, Insert and turn the enable key clock wise.
3, Press the Reset Button for around 1 second.
3, The “Standard Call” is Reset, All Field devices are silenced.
4, The field warning devices will and the ECU buzzer will bleep twice to confirm successful reset.