12
Once “yes” is selected, the device will restore factory
setting.
Storage of the Fish Finder
1. Clean the sensor with fresh water and dry off. Do not
submerge or spray the screen with water.
2. Keep the sensor and the display unit in dry condition after
use. Don’t place them in wet condition. Don’t place the
sensor in metal container.
3. Never leave the fish finder in temperatures over 113°
Fahrenheit (45° Celsius) as the extreme temperatures can
damage the electronic components.
4. Keep the unit in temperatures above 14° Fahrenheit (-10°
Celsius).
Note: Please leave sensor in air for a few days if there is
water in the sensor.
Product Specification
1. Display
Display Size: 2.6 inches
Display resolution: 240*320
Backlight: LED backlight
2. Sonar & Radio
To Next Page
Loading...