Need help?Do you have a question about the Ventis Controller and is the answer not in the manual?
General| Brand | Ventis |
|---|---|
| Model | Controller |
| Category | Controller |
| Language | English |
Covers status like Auto Whirly, Filter Warning, Operating Mode, Fan Speed, Source Temp, Room Temp, Humidity.
Details User Set Point, Enabled Modes (Drying, Heating, Cooling, Ventilating), Error Display, and Circulation Level.
Explains symbols for Drying, Heating, Cooling, Ventilating, and filter status.
Explains symbols for Ceiling and Outside air sources.
Explains the core principle of introducing clean, filtered air for comfort.
Introduces AUTO, FLUSH, and OFF modes and how to toggle them.
Explains fan activation based on desirable air sources and temperature set points.
Describes the display elements like fan speed, heating/cooling icons, and source display.
Explains its use for flushing odours or excess moisture for up to two hours.
Describes how the fan bar graph and source are displayed, and that set point is ignored.
Explains that fan, auto whirly, and dampers are disabled in this mode.
Notes that room temperature and humidity are still displayed, and set point can be changed.
Lists access to Set Modes, Fan Speeds, Filter Details, Settings, and Installation.
Explains enabling/disabling Drying, Heating, Cooling, Ventilation, and Boost modes.
Describes how to set maximum fan speeds for Heating and Cooling modes.
Explains how to view filter life remaining and reset the filter indicator.
Covers display brightness, delay, and Auto Whirly fan control.
Details humidity set point for drying and access to fault codes and product configuration.
Explains enabling drying for dampness and humidity set point guidelines.
Describes using heating in winter and cooling in summer based on temperature.
Explains drawing fresh air for stuffy rooms and its temperature effects.
Details setting airflow intensity levels: LO, MID, HI.
Details operation when roof space is 2 degrees more desirable than home.
Details operation for 1 degree desirability and ramp-up speeds.
Shows relative humidity for air sources and room, plus humidity set point.
Explains how to access the Humidity Display from the main screen.
Shows dew point temp for air sources and room in Celsius.
Shows water content of air sources and room in grams per cubic meter.
Describes accessories for cooling with outside air and filtering air.
Explains its role in extracting hot air and drawing cool air for home cooling.
Explains use of sensors/dampers for optimal air source selection for cooling/warming.
Advise setting Ventis temperature higher than existing heating/cooling.
Recommends disabling competing modes (cooling in winter, heating in summer).
Details filter life, replacement intervals, and system notifications.
Describes the information shown during the system's startup sequence.
Explains how to read fault codes, titles, and descriptions for problem resolution.
Covers controller reset and precautions for SD card removal/insertion.
Explains condensation in cold rooms and prevention methods.
Details entitlement to replacement, refund, or repair under Australian Consumer Law.
Illustrates movement between different controller displays and modes.
Shows the sequence for accessing main menus, sub-menus, and specific settings.
To Next Page