13
VENTILATION
Enable Ventilating mode if your room is very stuffy, stale or damp. This mode allows
your Ventis to draw in fresh air on a continuous basis with the fan speed automatically
varying depending on the temperature set point, room and source air temperatures
and humidities. This mode may be overridden by Drying mode.
Ventilating mode could make your room slightly hotter or colder, as fresh air may be
drawn in at low speed that shifts the room temperature away from the desired set point.
IMPORTANT:
Extended use of Ventilating mode (particularly with Hi Boost) could increase your energy bills by
competing with other heating or cooling systems in your home.
BOOST
Set the Boost level to increase the activity of your Ventis system.
LO: This mode is a lower airflow setting, and creates the benefit of low energy usage.
MID: This is the normal Ventis mode, suitable for the majority of homes.
HI: Use this boost level if you are experiencing very damp conditions.
*See also page 14 for more detailed explanation of the circulation (BOOST) modes
MID
To Next Page
Loading...