Vento FINO - Tools; Check if All Parts and Accessories Are Present

Mounting Bracket
Downrod Set
Canopy
Fan Body
Blades
.
.
.
.
.
A
B
C
D
E
.G Screw Pack
Screws For Mounting Bracket x2
Wire Connector x3
h
i
.
.
.F Remote Control
Transmitter
Transmitter Cover
Receiver
Wall bracket For Transmitter
Battery
Instruction Manual For
Remote Control
Accessories Packet
.
.
.
.
.
.
.
a
b
c
d
e
f
g
A.
B.
C.
D. F.
E.
G.
a.
b.
c.
d.
f.
g.
e.
II. FOR YOUR CONVENIENCE ON ASSEMBLY & INSTALLATION,
PLEASE FOLLOW THIS MANUAL DESCRIPTION
2. Check if all parts and accessories are present:
1. Tools:
Philips Screwdriver
Slotted Screwdriver
Adjustable wrench
Cutter
Ladder
Install the power cord in accordance with the cord
.
.
.
.
.
.
A
B
C
D
E
F
NOTE: THE TRANSMITTER IS DESIGNED FOR USE WITH EITHER WALL BRACKET
FOR TRANSMITTER (d.) OR THE TRANSMITTER COVER (b.)
NOTE: PLACE THE PARTS FROM (G.) SHOWN ABOVE, IN A SMALL CONTAINER TO
PREVENT PARTS FROM GETTING LOST. IF ANY PARTS ARE MISSING, CONTACT
YOUR LOCAL RETAILER FOR REPLACEMENT BEFORE PROCEEDING.
h.
i.