Ventrac MJ840 - Introduction; Product Description; Why Do I Need an Operators Manual

Introduction - 5
INTRODUCTION
Accessories
Item Description Part Number
MJ840 Mulching Kit 70.8087
Product Description
The MJ840 is designed for the sole purpose of nish mowing. The MJ840 features a 211 cm (83 inch) cutting
width with full rear rollers for even cutting and striping, rear discharge, and a ip-up deck design. The MJ840
features three independently oating decks that follow the contour of the terrain with up to 40 degrees of mo-
tion for each side deck.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely operate,
maintain, and service your machine. It is divided into sections for convenient reference of the appropriate sec-
tion.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Reading
the operator’s manual will help you become familiar with each specic piece of equipment. Understanding
the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the equipment.
Keep this manual with the machine at all times. The manual should remain with the machine even if it is sold.
If this manual becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac
dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may
result in personal injury and/or damage to the equipment.
Venture Products Inc. is pleased to provide you with your new
Ventrac contour mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac
dealer for a complete list of items available for your new contour
mower.