Venus X1C5 Pro - Advanced Connectivity and Data; User Interface and Software; Operational Notes and Specifications

Support full DIGI relay function, support custom relay name, support relay remote turn-off
function
Support remote control peripheral sensor input and relay output module
Built-in advanced CMX programming algorithm
Built-in transmit level, receive level adjuster (-10.5dB -0dB)
Built-in high performance GPS\Beidou\GLONASS multimode hybrid positioning module
Built-in advanced algorithm to support rich data analysis
Support heading, north position, relative motion position calculation
Support APRS distance, elevation target calculation, support G5500 aircraft, vessel and other
tracking control
Companion PC setup software (Chinese, English) (requires .NET 4.0)
UHF or VHF options, 1W RF output
Support battery USB direct charging
Support comprehensive GPS interface, beacon list interface, real-time beacon interface, beacon
record analysis interface
Built-in temperature\pressure auxiliary sensor (temperature & air pressure values for reference
only)
Support off-network use, no network, direct mutual positioning
Support liuyun, APRSdroid, LOCUS, Ovi and other APP
Support user independent firmware upgrade
Weight: 99 G (battery included)
Dimensions: 88 x 50 x 20 mm (antenna excluded)
Note: Typical GPS locking time is 1 – 5 minutes,please use the tracker outside!
Do not use it under the water!
Turn off the RF module if you only use WiFi to report position,as RF module causes heat!