Installation
Firmly connect the provided Ethernet Cable from your
VeraSecure to your Wi-Fi router (or other Internet source).
To setup your controller, go to http://home.getvera.com
If you are a new user, click the “I have a new controller”
button on the screen. Agree to the terms and conditions.
Then select your Controller.
If you already have an account, please login.
Click the “Add another controller” button.
Then select your Controller.
Follow the Setup Instructions.
Firmly connect the AC Power Adapter to VeraSecure
and plug it into an AC outlet. VeraSecure has no on/off
switch. It will power up as soon as you plug in
the AC adapter.
1
3
2
USBAntenna Ethernet Power
To Next Page
Loading...