7
WARNING:
Always unplug lamp before performing bulb
replacement or installation and allow sufficient time for the bulb to cool.
WARNING:
This bulb contains a trace amount of mercury.
For safe handling, cleanup, disposal and recycling in accordance with
applicable laws in US see www.epa.gov/cfl and in Canada, please visit
www.ec.gc.ca/mercure-mercury/ and www.lightrecycle.ca
Your HappyLight uses a bulb manufactured only by Verilux. To order a
replacement, please call Verilux toll-free, at 1-800-454-4408.
Initial Bulb
Installation
Bulb
Replacement
Lens
Replacement Instruction Steps
1. 1. 1.
Be certain the lamp is unplugged prior to
beginning.
2. 2. 2.
Remove the top cover (A) by lifting firmly. The
top is secured by two (strong) magnets (B) that
will release when lifted properly.
X 3. 3.
Slide the lens (C) out of its channel by pulling it
gently upward.
3. X X
Carefully remove the bulb from the bubble
wrap.
X 4. X
Remove the old bulb by twisting it
counterclockwise until the bulb pins align with
the openings in the bulb mount and lifting
upward. (See illustration 2.)
4. 5. X
Insert the new bulb into the bulb mount and
rotate it clockwise until it clicks in place. (Either
pin in either opening is fine. See illustration 3.)
5. X X
Remove the lens from the plastic bag that also
held this instruction manual.
6. 6. 4.
(Re)install the lens and top cover, reversing the
procedure shown in "Lens Replacement" steps
two and three above.
7. 7. 5.
Dispose of any old parts and packaging
according to local regulations.
Bulb/Lens Installation/Replacement
To Next Page
Loading...
Need help?
General
