Setup and Take Device Pretest — continued
3
Setup – Plug In
• Place lamp on a flat level surface
• Insert power adapter plug into the adapter
socket — as shown on rear of the lamp
• Plug adapter into a standard 120 VAC
electrical outlet
• Turn on the lamp with the power button
located on the top of the lamp
adapter
socket
power button
4
Take Device Pretest
Before you begin using your HappyLight
®
Therapy Lamp, please take the
Device Pretest on page 7 and read through the manual for helpful information
and safety precautions.
5
How to Use – Brightness
A touch control has been added to your HappyLight
®
Therapy
Lamp so that you can customize your light therapy experience
for maximum comfort and results. For your convenience, your
selection is automatically saved when you turn off your light.
Touch Control
Choose between three different brightness
levels to find the level that is comfortable
for you.
1
If you find the brightest setting
uncomfortable, you can start with a lower
setting and work your way up to the full
10,000 lux over multiple sessions. Increasing
the brightness will also deliver your daily dose
of healthy light more quickly, which results in
shorter light therapy sessions.
How to Use
1
Brightness level options are 5,000 lux, 7,500 lux and 10,000 lux.
5
VT31_MAN_Rev2-002.indd 5 3/8/19 1:56 PM
To Next Page
Loading...
Need help?
General
