Verilux vt20 - User Manual

Questions and Answers

J
Jay RiddleJul 31, 2025
What to do if my Verilux vt20 light won’t come on?
- E
  emeyerJul 31, 2025
  If your Verilux Home Lighting light won't come on, there are a few potential causes. First, ensure the plug is securely inserted into the wall outlet. Next, check the bulb for any blackening or darkening at the bottom of the spiral, which indicates the end of its life, and replace the bulb if needed. Finally, make sure the bulb is securely seated in the socket. If not, repeat the bulb installation process, but first disconnect the lamp from the outlet.
M
Marc LoveAug 9, 2025
Why is my Verilux Home Lighting light flickering?
- C
  Chad WilliamsAug 9, 2025
  If your Verilux Home Lighting light is flickering, it could be due to a few reasons. Check that the plug is securely inserted into the wall outlet. Also, ensure the bulb is securely seated in the socket; if not, repeat the bulb installation process after disconnecting the lamp from the outlet. Finally, make sure the lamp is not connected to a dimmer switch; connect it directly to a wall outlet without a dimmer.
C
Cheryl HooverAug 20, 2025
Why is there blackening/darkening at the ends of my Verilux Home Lighting bulb?
- A
  ashleyzamoraAug 21, 2025
  Blackening or darkening at the ends of a Verilux Home Lighting bulb can occur for two reasons. If it's a new bulb, this darkening may appear when first turned on but should fade after a few minutes. If it's an older bulb, darkening indicates the end of its life, which may reduce the light output. In this case, bulb replacement is recommended.