990-03558-00 Rev B
DCO-00245
Change the watch clock face
For devices with version 49.000 and above, you can choose whether the clock screen shows the time as either an analog or digital
display:
1. Enter the menu by pressing the Select button ✓.
2. Scroll with the Down button ↓ to find Settings, and press the Select button ✓.
3. Find Watch face, and press the Select button ✓.
4. Scroll to highlight either Analog or Digital, and press the Select button ✓.
Take an electrocardiogram (ECG)
An electrocardiogram (ECG) is a reading that records the electrical activity in the heart over a period of time.
Devices with firmware below version 49.000
To take an ECG reading on your device:
1. Use the top button to navigate the ECG screen. Use the middle button to begin ECG reading.
2. Hold the device's polished metal frame by positioning your index finger at the top and your
thumb at the bottom.
3. Rest both hands on an even surface and continue to hold for 60 seconds. After the ECG is
complete, you can let go of the frame.
If you're having problems taking an ECG reading, your finger might not be properly coming in contact with
the frame. Rest your arm on a flat surface, and lightly adjust the angle your finger on the rim.
Devices with firmware version 49.000 and above
To Next Page
Loading...