Verine Meridian MK2 User Manual

Meridian MK2
CONVENTIONAL FLUE LOG EFFECT GAS FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No’s NHEL**RN2 is only for use on Natural Gas (G20) at a
supply pressure of 20 mbar in G.B. / I.E.
Model No’s NHEL**RP2 is only for use on Propane Gas (G31) at a
supply pressure of 37 mbar in G.B. / I.E.
** denotes cosmetic variant

Verine Meridian MK2 Specifications

General

Brand	Verine
Model	Meridian MK2
Category	Indoor Fireplace
Language	English

Summary

Section 1 Information and Requirements

1.0 Appliance Information

Provides key specifications and technical details for the appliance.

1.1 Installation Requirements

Outlines legal and regulatory requirements for safe installation.

1.2 Flue and Chimney Suitability

Details requirements for compatible flue and chimney systems.

1.3 Fireplace / Surround Suitability

Specifies requirements for fireplace and surround materials.

1.4 Shelf Position

Defines minimum clearance requirements above the appliance for shelves.

1.5 Flue / Chimney Inspection

Describes pre-installation checks for flues and chimneys.

1.6 Fire Place Opening and Chimney Catchment Space

Specifies dimensions for the fireplace opening and catchment space.

1.7 Fitting to Fireplaces with Existing Chairbricks and Conventional Brickbuilt Chimneys

Instructions for installation into specific fireplace types.

1.8 Fitting to Pre-Fabricated Twin Wall Metal Flue Boxes

Guidance for installing the appliance with prefabricated flue boxes.

1.9 Hearths

Details the requirements for hearth materials and installation.

1.10 Wall / Hearth Mounting

Instructions for mounting the appliance on walls or hearths.

1.10 Spillage Monitoring System

Information on the appliance's spillage monitoring safety system.

Section 2 Installation of Fire

2.1 Unpacking the Fire

Steps for unpacking the appliance and checking contents.

2.2 Installing the Fire Box

Detailed instructions for physically installing the firebox into the fireplace.

2.3 Fitting the Batteries to the Receiver Unit & Handset

Guide for installing batteries in the remote control system.

2.4 Gas Tightness and Inlet Pressure

Procedures for checking gas connections and pressure.

Section 3 Assembling Fuel Bed and Commissioning

3.1 Assembling the Log Fuel-Bed

Step-by-step guide for assembling the ceramic log fuel bed.

3.2 Lighting the Appliance

Instructions on how to safely light and operate the gas fire.

3.3 Checking for Clearance of Combustion Products

Procedure for performing a spillage test to ensure safe operation.

3.4 Removing / Re-fitting the Flue Restrictor Baffle

Instructions for removing and refitting the flue restrictor baffle.

3.5 Removing / Re-fitting the Trim Assembly & Cosmetic Trim

Steps for removing and reattaching decorative trim pieces.

Section 4 Maintenance

4.1 Removing the Burner Assembly from the Fire

Detailed steps for safely removing the burner assembly for servicing.

4.2 Removing the Gas Control Valve

Procedure for removing and replacing the gas control valve.

4.3 Removing the Pilot Assembly.

Instructions for removing the pilot assembly, noting thermocouple limitations.

4.4 Replacing the Radio Frequency Receiver or its Batteries

Guide for replacing the RF receiver unit or its batteries.

Parts Shortlist

A list of available spare parts with their part numbers.

Section Five - User Instructions

5.1 Installation Information

User-facing overview of installation conditions and safety.

Important Safety Information

Crucial safety warnings and precautions for operating the appliance.

5.2 Lighting the Appliance

Step-by-step instructions for lighting the fire using the remote.

5.3 Removal / Re-fitting the Glass Frame Assembly

Guide for removing and reassembling the glass frame.

5.4 Re-laying the Fuel-Bed

Instructions for correctly repositioning the ceramic logs.

5.5 Cleaning - Warning

Important warnings and procedures for cleaning the appliance.

5.6 Removal / Re-fitting the Trim

Instructions for removing and reattaching the fire's trim.

User Replaceable Parts

Information on parts that users can replace themselves.