Home
Verine
Indoor Fireplace
Quasar HE
Verine Quasar HE User Manual
90 pages
Manual
Specs
Ask a question
To Next Page
To Next Page
Loading...
Quasar
HE
INSET
LIVE
FUEL
EFFECT
GAS
FIRE
Installation,
Maintenance
& User
Instructions
Hand
these instructions
to
the owner
following
installation,
they
must
be retained
for
future reference.
Model
No’
s NHKC**MN,
NHKC**SN &
NHKC**RN2
are
only for
use
on
Natural
Gas (G20)
at
a supply
pressure
of
20 mbar
in
G.B. /
I.E.
**
denotes cosmetic
variant
2
Table of Contents
Table of Contents
3
Information and Requirements
4
Appliance Information
4
Conditions of Installation
5
Flue and Chimney Suitability
5
Fireplace / Surround Suitability
6
Shelf Position
6
Chimney Inspection
6
Fire Place Opening / Catchment Space
7
Fitting to Metal Flue Boxes
8
Fitting to Pre-Cast Flues
9
Spillage Monitoring System
9
Wall / Hearth Mounting
10
Installation of Fire
11
Unpacking the Fire
11
Installing the Fire Box
11
Gas Tightness and Inlet Pressure (MC Models)
20
Gas Tightness and Inlet Pressure (SC Models)
21
Gas Tightness and Inlet Pressure (RC Models)
21
Assembling Fuel Bed and Commissioning
22
Assembling the Ceramics and Fuel Bed - Coal Models
22
3.2 Assembling the Ceramics and Fuel Bed - Pebble Models
27
Lighting the Appliance (Manual Control Model)
31
Lighting the Appliance (Slide Control Model)
32
Fitting the Batteries (Remote Control Models)
33
Lighting the Fire Manually Via the Control Valve (Remote Control Models)
34
Setting the Time, Temperature and Day on the Remote Handset (Remote Models)
35
Lighting the Fire Via the Remote Handset (Remote Control Models)
39
Advanced Settings of Remote Control Models
42
Fitting the Trim / Fret or Fascia
46
Checking for Clearance of Combustion Products
47
Section 4
48
Maintenance
48
Removal of the Burner Assembly (Manual Control Models)
48
Removal of the Piezo Igniter (Manual Control Models)
49
Removal of the Control Tap (Manual Control Models)
49
Removal of the Pilot Assembly (Manual Control Models)
49
Removal of the Burner Assembly (Slide Control Models)
50
Removal of the Battery Ignitor (Slide Control Models)
51
Repacing the Battery (Slide Control Models)
51
Removing the Oxy-Pilot Assembly (Slide Control Models)
51
Replacing the Control Cable (Slide Control Models)
52
Removal of the Burner Assembly (Remote Control Models)
53
Removing the Remote Gas Valve
53
Removing the Oxy-Pilot Assembly (Remote Control Models)
54
Replacing the Batteries (Remote Control Models)
54
Fret Information / Parts Shortlist
55
Operating the Fire - Manual, Slide & Remote Control Variants
58
Manual Operation of Remote Control Models
65
Replacing the Batteries on Remote Control Models
66
Replacing the Batteries on Slide Control Models
66
Spillage Monitoring System
67
Setting the Time, Day & Temperature on the Remote Handset
68
Advanced Settings Menu of the Remote Control
72
Re-Assembling the Ceramics & Fuel-Bed - Coal Models
76
Re-Assembling the Ceramics & Fuel-Bed - Pebble Models
81
12 Cleaning the Fire & Fuel-Bed / Glass Panel
86
Removal & Re-Fitting of the Glass Panel
87
Removal & Re-Fitting the Trim / Fret
89
User Replaceable Parts
89
Need help?
Do you have a question about the Verine Quasar HE and is the answer not in the manual?
Ask a question
Verine Quasar HE Specifications
General
Brand
Verine
Model
Quasar HE
Category
Indoor Fireplace
Language
English
Related product manuals
Verine Alpena
64 pages
Verine Alpena NBFC**MN2
64 pages
Verine ATINA 500
15 pages
To Next PageTo Next Page
Need help?
General
