Need help?Do you have a question about the Verint Nextiva S2700e and is the answer not in the manual?
General| Camera Type | IP |
|---|---|
| Form Factor | Dome |
| Image Sensor | CMOS |
| Focal Length | 2.8 - 12 mm |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Resolution | 2MP (1920 x 1080) |
| Sensor Size | 1/2.8" |
| Lens | Varifocal |
| Day/Night | Yes (ICR) |
| Compression | H.264, MJPEG |
| Power | PoE (802.3af), 12V DC |
Provides step-by-step instructions for physically installing the S2700e and S2700eP camera models.
Explains how to connect the power supply to the camera using either 12V DC or Power over Ethernet (PoE).
Covers the initial setup and configuration of the camera, including network parameters and basic settings.
Details the process of updating the camera's firmware to access new features or improvements.
Explains different reset procedures (reboot, default config, hard reset) to troubleshoot camera issues.
To Next Page
