Need help?Do you have a question about the Verint Nextiva S2750e Series and is the answer not in the manual?
General| Brand | Verint |
|---|---|
| Model | Nextiva S2750e Series |
| Category | Security Camera |
| Language | English |
Identifies the intended audience for the guide.
Explains how to navigate and utilize the user guide effectively.
Details typographic conventions used throughout the document.
Lists other relevant documents for further information.
Mentions compatible products and their uses with the S2750e series.
Provides company information about Verint Systems Inc.
Lists official website addresses for product information.
Outlines methods for obtaining technical support and assistance.
Details the product's warranty terms and conditions.
Introduces the different models within the S2750e series.
Highlights the main functionalities and capabilities of the S2750e cameras.
Explains the SSL security features for IP link protection.
Describes the video frame rates supported by the IP cameras.
Lists the items included in the S2750e shipment.
Details the physical components and design of the camera casing.
Provides instructions on different ways to mount the S2750e camera.
Details the procedures for connecting power and Ethernet for installation.
Guides on how to adjust camera focus, zoom, and image parameters.
Explains the process of setting up the camera's initial parameters.
Step-by-step guide to configuring network parameters like IP address.
Describes how to establish direct video connections between devices.
Instructions on how to perform firmware updates for the device.
Explains how to perform hard and soft resets on the device.
Describes the meaning of different LED indications on the device.
Initial steps and prerequisites for accessing the web interface.
Details user account and device security settings.
Explains various security settings and their impact on device access.
Covers network configuration parameters for IP compatibility.
Describes parameters related to video encoding and quality.
Details video parameters specific to each encoder.
Presents current video characteristic values.
Covers parameters for the VSIP proprietary communication protocol.
Explains how to set system time and NTP parameters.
Instructions for viewing live video streams from the camera.
Tasks for device maintenance like reboot and firmware updates.
Lists the default settings for access management, network, video, and VSIP.
Explains DHCP and APIPA for network configuration.
Guide on how to access the Command Line Interface via Telnet.
Details how to configure Quality of Service (QoS) settings.
Illustrates and explains the pin configurations for Ethernet cables.
Details the imaging sensor and lens characteristics of the camera.
Lists video compression, frame rate, and resolution details.
Covers network interface, connector, and protocols used.
Information on power input, weight, dimensions, and environment.
Details configuration methods and regulatory compliance.
Lists standards and directives the product conforms to for electromagnetic compatibility.
States compliance with EU RoHS Directive on hazardous substances.
To Next Page
