3: Using the Web Interface
32 Verint Video Intelligence Solutions
Viewing Live Video
You can view the stream coming out of the first encoder of the camera using one of the two
available viewing methods, popup or embedded.
To close the live video sub-pane, click Close Window.
Before viewing live video on your computer, you may need to set up the following
parameters:
Local Video IP Port—The port number on your computer that will receive video.
Enable YUV Support—The indicator of whether YUV video conversion will be used. Most
graphics video cards support YUV.
Note: If you upgraded the device firmware, you need to perform the steps listed on
page 20 prior to viewing live video.
To Next Page
Loading...
Need help?
General
